Start with the water demand, not the heater
Before you pick a tankless unit for a kennel, list what you actually ask hot water to do: bathing dogs, cleaning runs and bowls, and keeping the washdown area warm. The EZ Tankless Water Heater is rated at 4.1 gallons per minute at a 35-degree temperature rise and 84,000 BTU. Those two numbers are your planning anchors, because they describe the flow and temperature lift the unit is built to deliver together.
This guide walks through the practical setup decisions for a kennel hot water system: how to read the flow rating against your fixtures, what the LP gas and battery ignition require, where the LP Regulator fits, and which details the supplied catalog does not confirm so you can verify them before installation.
The EZ Tankless Water Heater at a glance
- EZ Tankless Water Heater: No electric needed; uses LP Gas; 4.1 gallons per minute at 35-degree temperature rise; ignition requires two D batteries; 84,000 BTU; easily portable. These are the core sizing and installation facts for a kennel: flow and temperature rise set what you can run at once, LP gas and D batteries define the fuel and ignition setup, and portability lets you move the unit between wash areas.

EZ Tankless Water Heater
Sizing the EZ for kennel washing and cleaning
Sizing a tankless heater means matching its flow rating to the fixtures you run at the same time. The EZ is rated at 4.1 GPM at a 35-degree temperature rise. Treat that as a combined budget: if a dog-washing sprayer and a cleaning faucet are open together, their flows add up against the 4.1 GPM figure.
- Count simultaneous fixtures: Add the flow of every hot-water outlet you expect to use at once. A single bathing sprayer is the simplest load; a sprayer plus a bucket fill or washdown faucet is a heavier one.
- Check the incoming water temperature: The 35-degree rise is the temperature lift the unit is rated to provide at 4.1 GPM. Colder incoming water means the same flow delivers a lower final temperature, so plan around the season your kennel sees the coldest supply.
- Match the load to the job: For a home kennel or a single bathing station, one EZ unit is the natural starting point. For a larger facility running several stations at once, the 4.1 GPM rating is the limit to design around.
- Keep the unit portable: The EZ is described as easily portable, so you can position it near the wash area rather than plumbing a fixed run across the kennel.
Setting up the EZ Tankless Water Heater
The supplied information describes a user-friendly design that anyone can install and operate, and it calls for minimal maintenance. The exact plumbing connections and mounting method are not detailed in the supplied records, so confirm those against the unit's own documentation before you begin.
- Confirm the fuel supply: The EZ uses LP gas and needs no electric supply. Confirm your propane source and the regulator arrangement before connecting anything.
- Fit the LP Regulator: The LP Regulator is intended for water heater applications and is compatible with LP gas systems. It is designed to help manage gas flow safely and efficiently and to maintain consistent performance in the heating system.
- Install two D batteries for ignition: Ignition requires two D batteries. Keep a spare pair on hand so a dead battery does not stop a bathing session.
- Connect the water lines and test: Bring water to the unit, open a hot outlet, and let it run. The EZ heats water on demand rather than storing it in a tank, so hot water arrives without waiting for a reservoir to recover.
The LP Regulator: a small part with a steadying job
- LP Regulator: Compatible with LP (liquid propane) gas systems; intended for water heater applications; designed to help manage gas flow safely and efficiently. A tankless heater depends on steady gas pressure to hold its rated output. The regulator is the component that supports consistent performance, so it belongs in the setup plan rather than as an afterthought.

LP Regulator
What the EZ changes in daily kennel work
In a kennel, hot water is not a luxury; it is part of bathing, cleaning, and keeping the environment comfortable for the dogs. The EZ is described as providing instant access to hot water and a continuous supply for bathing, cleaning, and maintaining a warm, cozy environment, without the running-out problem of a tank that empties during peak hours.
Because it heats on demand rather than holding a heated reservoir, the tankless design also avoids the standby energy use of a storage tank. The catalog frames this as saving money on energy bills and reducing carbon footprint. The unit is described as built from high-quality materials for durability under daily kennel use, and as suitable for kennels of all sizes, from home-based operations to larger professional facilities.
Checkpoints before you commit
These are the points the supplied records leave open. Treat them as questions to answer with the unit's own documentation or a qualified installer, not as reasons to avoid the product.
- Exact plumbing and mounting details: The supplied records do not include fitting sizes, mounting method, or clearance requirements. Confirm these before installation.
- Ventilation requirements: LP gas appliances need proper venting, but the supplied information does not specify venting for the EZ. Verify the manufacturer's requirements for your space.
- Freeze protection: The records do not describe winterizing or freeze protection. If your kennel sees freezing temperatures, confirm how to protect the unit.
- Regulator sizing: The LP Regulator is described as a standard model configuration compatible with LP gas systems, but the supplied information does not state a pressure rating or a maximum BTU capacity. Check that it suits your installation.


