Back to Blog
How-to Guides 2026-11-20 Quality Kennel Supplies for Your Pets | Backyard Pet Supplies 0 views

How to Set Up a L-70 Lixit Water Nibble for Your Kennel

How to Set Up a L-70 Lixit Water Nibble for Your Kennel

Learn how to install and adjust a L-70 Lixit Water Nibble for your kennel. This guide covers pipe fitting, pressure adjustment, and angle setup to reduce spills.

Why Switch to a Lixit Water Nibble?

If you're tired of constantly refilling water bowls and cleaning up spills, a Lixit Water Nibble offers a practical alternative. This self-serve dog waterer attaches to standard ½-inch pipe fittings and releases water only when your dog licks the control lever. When your dog stops, the water shuts off automatically. This reduces mess and keeps fresh water available on demand.

Step-by-Step Installation

Installing the L-70 Lixit Water Nibble is straightforward. Here are the key steps based on the product's design.

  1. 1. Prepare the Pipe Fitting: The water nibble mounts onto any standard ½-inch pipe fitting. Ensure your water supply line has a compatible threaded fitting before starting.
  2. 2. Screw the Nibble onto the Fitting: Simply screw the L-70 Lixit Water Nibble onto the ½-inch pipe fitting. Hand-tighten firmly to create a secure seal.
  3. 3. Choose the Installation Angle: The water nibble can be installed horizontally or at a 45-degree angle. Angling it can make access easier for your dog. The supplied evidence confirms both horizontal and 45-degree angle installation are possible.
  4. 4. Adjust the Water Flow: Use the included orifice discs to regulate water pressure. The product can be adjusted from 5 psi up to 100 psi. Start at a lower pressure to avoid waste, then increase if needed. The catalog notes that you can adjust the flow from 20-60 PSI, and the broader range of 5-100 psi is also supported.
  5. 5. Test and Observe: After installation, let your dog drink from the nibble. Watch for leaks at the fitting and adjust the pressure if water drips after your dog stops licking.

Product Facts: L-70 Lixit Water Nibble

  • L-70 Lixit Water Nibble: Mounts a 1/2 inch pipe fitting. Water flows out of the center of the nipple. This confirms the nibble connects directly to standard plumbing, making installation simple for most kennel setups.
    L-70 Lixit Water Nibble
    L-70 Lixit Water Nibble
  • L-70 Lixit Water Nibble: Adjust the flow of water from 20-60 PSI. Can be installed horizontally or at an angle. You can fine-tune the water flow to match your dog's drinking habits, reducing waste and spills.
  • L-70 Lixit Water Nibble: Crafted from top-quality stainless steel. Stainless steel construction ensures durability and resistance to rust, even in a kennel environment.

What the Catalog Does Not Confirm

The supplied information does not include specific cleaning instructions or recommended maintenance intervals for the L-70 Lixit Water Nibble. For regular care, consult the manufacturer's documentation or clean the nipple with mild soap and water as needed. Also, while the nibble reduces spills, it does not replace a full water bowl for dogs that prefer a standing water source—consider using it alongside a bowl if your dog is hesitant.

Related Articles

Customer Service
Home
Products
Cart
Profile