Why Humidity Control Matters in Your Kennel
High humidity in a dog kennel can lead to condensation, mold growth, and an uncomfortable environment for your pets. Managing moisture levels is essential for maintaining good air quality and preventing structural damage. While a thermostat doesn't directly remove moisture, it can be a key part of a broader humidity management strategy by controlling ventilation equipment.
Product Facts: Peco Greenhouse Thermostat
- Peco Greenhouse Thermostat: 40°F – 110°F temperature range, 16Amp/110V or 12Amp/220V This wide range and high amperage capacity allow the thermostat to control powerful fans or heaters that help regulate humidity by moving air or raising temperature.

Peco Greenhouse Thermostat - Peco Greenhouse Thermostat: Weather resistant and corrosion resistant Kennels can be damp environments; this durability means the thermostat can be installed in areas where moisture is present without failing prematurely.
- Peco Greenhouse Thermostat: UL Listed and CSA Certified Safety certifications provide peace of mind when using the thermostat to control electrical equipment in a kennel setting.
Using the Thermostat for Humidity Management
The Peco Greenhouse Thermostat can be set to control either heating or cooling equipment. For humidity management, you typically pair it with an exhaust fan or a heater. Here's how to approach the setup.
- 1. Choose the right equipment: Connect the thermostat to a fan (for cooling/moisture removal) or a heater (to raise temperature and lower relative humidity). The thermostat supports up to 16A at 110V or 12A at 220V, so it can handle most kennel fans or heaters.
- 2. Set the thermostat mode: The device can be set to heating or cooling mode. For humidity control, use cooling mode to activate a fan when temperature rises (which also helps exhaust humid air), or heating mode to warm the space and reduce relative humidity.
- 3. Adjust the temperature setpoint: Use the adjustment dial to set the desired temperature. The thermostat will turn connected equipment on or off to maintain that target, indirectly helping to manage humidity levels.
- 4. Install in a suitable location: Place the thermostat in a representative area of the kennel, away from direct drafts or heat sources, to ensure accurate sensing. Its weather-resistant housing allows installation in slightly damp areas.
What the Catalog Does Not Confirm
The supplied product information does not include specific humidity thresholds, cleaning intervals, or wiring instructions for the Peco Greenhouse Thermostat. For detailed installation steps, refer to the manufacturer's manual. The thermostat is a tool for temperature management, which indirectly affects humidity; it does not measure or directly control moisture content in the air.

